Seata Chuck le mionaideachd àrd ER Milling
Tha seata chuck bleith ER na sheata chuck collet àrd-chruinneas, tha na collets air an luchdachadh as t-earrach, gus an urrainn dhaibh grèim fhaighinn air raon de mheudan.Tha an seata chuck seo foirfe airson a chleachdadh le muilnean agus innealan mionaideachd eile.
| Òrdugh Àir. | Meud toll | PCS/SET | |
| òirlich | mm | ||
| ER16-8in(mm) | 3/32 1/8 3/16 7/32 1/4 5/16 11/32 3/8 | 2 3 4 5 6 7 8 10 | 8 |
| ER25-6in(mm) | 1/8 3/16 5/16 3/8 1/2 5/8 | 4 6 8 10 12 16 | 6 |
| ER25-10 a-steach (mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 | 3 4 5 6 8 10 12 14 15 16 | 10 |
| ER32-6in(mm) | 1/4 5/16 3/8 1/2 5/8 3/4 | 6 8 10 12 16 20 | 6 |
| ER32-12 a-steach (mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 | 3 4 5 6 8 10 12 14 15 16 18 20 | 12 |
| ER40-8in(mm) | 1/8 1/4 3/8 1/2 5/8 3/4 7/8 1 | 3 5 8 12 15 18 22 26 | 8 |
| ER140-15 a-steach (mm) | 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 | 3 4 5 6 8 10 12 14 15 16 18 20 22 24 26 | 15 |
Snàthainn Bar Tarraing
| Taper de collet chuck | Snàthainn de bhàr tarraing | |
| R8 | 7/16＂-20UNF | |
| 7:24 30 | M12 × 1.75 | 1/2＂-13UNC |
| 7:24 40 | M16 × 2.0 | 5/8＂-11UNC |
| 7:24 50 | M24 × 3.0 | 1＂-8UNC |
| MS2 | M10 × 1.5 | 3/8＂-16UNC |
| MS3 | M12 × 1.75 | 1/2＂-13UNC |
| MS4 | M16 × 2.0 | 5/8＂-11UNC |
| MS5 | M20 × 2.5 | 3/4＂-10UNC |
| MS6 | M24 × 3.0 | 1 ＂ -8UNC |
Feuch an cuir thu fios gu snàithlean bàr tarraing collet chuck agus sònrachadh collets (meatrach no òirleach)
Feuch an cuir thu fios gu fad shank dìreach agus dia.
Tha sinn toilichte a bhith a 'solarachadh collets agus chucks le diofar shank agus meudan a rèir do riatanas.
